Then, find a suitable ground location before attaching the negative terminal of the trickle charger.
The ground location can either be a large bolt connected to the chassis or a part of the frame that is free from grime, dirt or oil. Connect the Cables Prior to connecting any cable, hoook the appropriate amperage and voltage for your car battery. Then, turn to your alligator clips and look for the red and black clips.
Make sure the negative wire is solidly attached to the ground location before you plug your car charger. Triclle, refrain from touching any of the wires once the charger is already plugged as doing so can result to shock or injury. Lastly, Turn on the Charger Before turning on the charger, double check your manual and make sure you are following the recommended settings for your trickle charger and battery.
Turn the charger on and, if available, read the amp meter. If the meter reading is high, it means that the battery is low or zero in energy.
If, by contrast, the meter reading is low, it may either mean jow the battery is sufficiently charged or your ground connection is not enough. In cases like this, turn off the trickle charger for car and try reconnecting the charger.
How Does a Car Ohok Charger Work Battery chargers have the same working mechanism—they supply an electric current to batteries so the cells can feed on these currents and regain energy. However, not all battery chargers are created equal. Typically, a fully-discharged car battery takes around 20 hours to trickle charge.
When and How to Use a Trickle Charger
For instance, a amp battery with a reserve capacity RC charger 60 can take 1 hour to charge, while a 2-amp battery with an RC of 60 can take as long as 20 hours to trickle charge. Even though a car battery trickle charger is highly advanced, it is still vulnerable to over-charging your battery, which can lead to serious how damage. It is very easy to get a good trickle if the battery does have some juice.
Before you even get started, if you have to remove the battery from the vehicle to charge it, be sure you have the tools for the job. Some batteries are easily accessible; however, some are under or in the fender and some may even be in the trunk or trickle the seat depending on the make and model of your vehicle. Be sure all accessories are off and the lights, including the interior light, are off.
If you have anything on, it could charger the battery to arc while you how working with it. Once you get down to the battery, remove the negative or hook cable first. This is always the black cable unless someone replaced the cables with the wrong colors.
How to Charge a Car Battery - Easy Instructions | Meineke Blog
Clean hhook battery terminals with a terminal cleaning brush and a mixture of baking soda and water to neutralize the battery acid. If the battery terminals and posts have a lot of acid buildup, wear eye protection and a mask so the airborne corrosion does not contact your eyes, nose and mouth.
Don't touch your face until after you've washed your hands. If the battery has removable triclke, carefully pry the caps off and check the level of the water.
If any of the cells looks low, add distilled water only; and take care to not overfill the battery. Follow the instructions for your particular charger. Basic instructions for most chargers include:.
When removing the charger, turn it off first, then remove the positive then negative cable. If the battery voltage is below The same battery will take about 6 hours to fully charge if the charge rate is 10 amps.